How Much Could You Save?
Enter what you know about your site — even just a monthly electricity bill — and get an instant savings estimate.
Enter your electricity spend to see an estimate.
$0a year
0.0% of your electricity bill
- Power-factor correction and harmonic elimination$0
- HarmoniQ Alpha and phase balancing$0
- Power-factor penalty elimination$0
- Demand charge reduction$0
- Total annual saving$0
No power-factor penalty applies at 0.90 or above, so that line stays at zero.
Demand is not billed in kVA in this market, so power factor correction does not reduce it and that line stays at zero.
This is the whole bill saving: the 10–20% cut in energy use, plus the power-factor and capacity charges that fall away with it, where the tariff carries them. Typically 10–20% of the bill, and about 25% where all three apply. It reflects the inputs you gave and is an estimate, not a quotation. Power factor used: —.
Equipment life
1.0×
- Winding temperature
- −0.0 °C
- Added service life
- +0.0 years
- Protected equipment
- $0
- Annual capex saving
- $0
Carbon a year
0.0 t
- Energy saved
- 0 kWh
- Grid emission factor
- 0.000 kg/kWh
Figures are illustrative estimates based on the inputs you provide and typical industrial load profiles. Actual savings depend on site-specific conditions and are confirmed only after a formal site assessment.
Get a precise assessmentFive Mechanisms, One Invoice
Three of these cut the energy your site consumes. The other two are charges on the same bill that fall away with it.
Energy · kWh
Power-factor correctionLess current for the same work cuts I²R losses in motor windings, transformers and cables.Energy · kWh
Harmonic eliminationRemoving harmonic current cuts I²R and eddy-current losses, which rise steeply with harmonic order.Energy · kWh
Line conditioningThe HarmoniQ Alpha matches impedance and balances phase currents at each load.Bill
Penalty eliminationWhere the utility charges for poor power factor, correcting it to 0.98 or better clears the charge.Bill
Demand reductionLower peak kVA lowers the demand and capacity charges on the same invoice.
The model is deliberately conservative. Equipment life follows the IEEE 117 / Arrhenius insulation-ageing model, with winding cooling capped at 15 °C, so the estimate lands mid-range rather than at the ceiling.
Carbon counts real energy savings only, never billing items, using country-specific grid emission factors from the IEA.
Replace the Estimate With Your Meter
A site assessment meters your real baseline and quantifies the saving precisely. Every installation is backed by a minimum performance guarantee — if the equipment doesn't deliver the agreed savings, you don't pay.